How To Make Your Own Spring Wreath

Wreaths. Should they just be for Christmas? Now, before Blogger and Instagrammer Mel came along, I have a secret to tell you. I didn’t even own a wreath, not even a little one to adorn my door over the (what seems to be getting longer every year) Christmas period. And then 2 years ago I bought my first tiny Christmas wreath and my love affair started there. Every year they get bigger and more fanciful and I’ve now started delving into wreaths for all kinds of occasions, because let’s face it, my front door looks far prettier with some faux flowers hanging from it!

  Eucalyptus and Ivory Peony  - The Big Door Wreath Company
Eucalyptus and Ivory Peony – The Big Door Wreath Company
 Ivory Tulip Wreath -  @thebigdoorwreathcompany
Ivory Tulip Wreath – @thebigdoorwreathcompany
 Stunning  Green Parlour  Wreath
Stunning Green Parlour Wreath
  White Peony Bow  Wreath - @thebigdoorwreathcompany
White Peony Bow Wreath – @thebigdoorwreathcompany
 Multi coloured tulip wreath -  @thebigdoorwreathcompany
Multi coloured tulip wreath – @thebigdoorwreathcompany

I really wanted a spring wreath and absolutely loved seeing all the beautiful creations appearing on my Instagram feed, especially the beautiful tulip one by @thebigdoorwreathcompany so I decided to have a go at creating my own. I already had some faux eucalyptus and flowers around the house so used what I already had to create my own wreath. Below is a step by step guide to how I did it.

HOW TO MAKE A SPRING WREATH

Here’s what I needed to make my own spring wreath

 Wire cutters, floral pins, satin ribbon, glue gun and polystyrene wreath
Wire cutters, floral pins, satin ribbon, glue gun and polystyrene wreath
 A lot of fake foliage going on
A lot of fake foliage going on
 Artificial Eucalyptus
Artificial Eucalyptus
 Artificial Vanilla Grass
Artificial Vanilla Grass
 Artificial White Rose
Artificial White Rose
 Artificial Cream Delphinium Flower
Artificial Cream Delphinium Flower
 Artificial White Gypsophila
Artificial White Gypsophila
 Artificial Pink Peony
Artificial Pink Peony

1. First of all, I used the glue gun to stick the end of the green ribbon to the wreath and then wrapped the ribbon around the wreath, keeping it snug and making sure none of the wreath could be seen between the overlaps. I used green ribbon as I knew this would be the predominant colour of the wreath so it would camouflage any gaps. Once the whole of the wreath was wrapped in the ribbon, I secured the end with the glue gun once again.

 Applying a small amount of glue to fix the ribbon
Applying a small amount of glue to fix the ribbon
 Sticking it on, obvs… :)
Sticking it on, obvs… 🙂
 3/4 of the way there
3/4 of the way there

2. Next, I cut all the excess stems off the foliage with wire cutters. I also separated a few of the eucalyptus branches as they were quite wide.

 Some heavy duty wire cutters, these faux flowers are tough!
Some heavy duty wire cutters, these faux flowers are tough!
 I cut each stem just before the flowers/leaves branched off
I cut each stem just before the flowers/leaves branched off

3. Then the fun bit begins. I started with securing the foliage with the floral pins, then filled in the gaps until the wreath was entirely covered with greenery. I only had 6 vanilla grass sprays so I put them on the wreath first making sure they were equal distance apart and then filled in all the gaps with the eucalyptus until you could no longer see the green ribbon. I then hung the wreath up to see where the gaps were to continue filling until I was happy.

 Each piece of foliage is secured with a floral pin, which easily pushes through the wreath
Each piece of foliage is secured with a floral pin, which easily pushes through the wreath
 Wreath nearly completed, just a few more gaps to fill
Wreath nearly completed, just a few more gaps to fill

4. Once the foliage had made up the bulk of my wreath, I then set about adding some floral pieces to add some colour. With most of the flowers, I was able to tuck them into the foliage that was already secured, but I still needed some floral pins to secure the stems. I tried to make sure the floral pieces were evenly spread, but didn’t add too many. I think the wreath just needed 3 or 4 “statement” flowers with a sprinkling of Gypsophila and Delphinium here and there.

 Tucking the flowers in between the foliage
Tucking the flowers in between the foliage
 The end result
The end result

5. When I was happy with the wreath, I made sure all pieces were secured by shaking it really hard (I’m sure that’s a very technical way of doing it! 😊) and if any pieces came loose, I would fasten them with more floral pins. Some of the leaves became loose from the flowers so I glued them back on using the hot glue gun. The final step was to create a hanger for the wreath, I used metallic wire which I wrapped around the wreath and made a loop at the end to hang from.

 Tying the metal wire around the wreath
Tying the metal wire around the wreath

And that’s it! It took me about 2 hours to complete and now sits happily on our front door. You can use any foliage or faux flowers that take your fancy, although I found that eucalyptus really works a treat as it covers the wreath easily and is cheap to buy. You can also add other touches to your wreath like bows, butterflies or even Easter objects such as fluffy bunnies or eggs. I really had a lot of fun creating this wreath, I thought I would find it a little tedious or too fiddly, but I thoroughly enjoyed it.

Mel x

Leave a comment

  1. Melanie Boyden
    Author
    29/04/2019 / 10:19 am

    Ah, thanks Rebecca. I do love a floral wreath and yes, my door felt empty when I took mine down in the new year. It was really fun to do as well, you’ll enjoy it. x

  2. Sheryl Pedersen
    08/02/2020 / 3:19 pm

    Can you please post how you made the Green Parlor wreath? It is stunning! Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *